Lots on the go.. although not much to see quite yet. Car now sits at the perfect ride height and is on the center of the adjusters. The ride height can easily be tuned up or down an inch or so. We have the floors/seating on the go and also starting to work on the fuel system.
Here’s the concept for reinforcing the floors. This will allow stock buckets to be bolted into the car – and the brackets shown will allow the Sparcos to be bolted in at the correct height. Have most of the parts made – now working on getting them in the car. Figured this would work much better than the after thought that was used to accomadate buckets on a stock vehicle.
